Showing posts with label 3D. Show all posts
Showing posts with label 3D. Show all posts

18 March 2016

Working on WingSpan

The key frames for shot 6 have been tweaked in both the dope sheet and graph editor and shot 8 has been blocked:




The animation is a lot closer to the desired movement of the character, but I still need to animate her facial expressions. The above animatic is made up of both shots 6 and 8 - shot 5 being a close up of the locket in her hands. It was requested that I make it obvious where the shot should cut, so the animation jumps to the start of shot 8.

4 March 2016

Wing Span begins

The animation stage has finally begun for the crew project film 'WingSpan'. I've been given shots 6 and 8 to work from as they are fairly similar in terms of action and composition.




This is the first stage of animation for shot 6, which gives a rough idea of Amelia's timing and movement.

10 February 2016

Let's start a band!

This week we were signed up to digital tutors, giving me access to a plethora of video tutorials for a animation software. As I have an interest in becoming a 3D generalist, I have created a playlist full of interesting tutorials for Maya, Mudbox and 3DS Max to learn watch over the next year.

I have started off with a tutorial for modelling an electric guitar in Maya, which I am hoping to complete over the next two weeks in my free time. The whole tutorial lasts over 18 hours, but this is my progress so far after approximately an hour and a half:



8 May 2015

Modelling Progression

With the end of this semester edging closer, I have been working hard on the remaining assignments; background painting, motion studies, the sound project, camera projection mapping and the group collaboration to create a title sequence.

Between working on paintings, I have taken some time to practice modelling in Autodesk Maya. I found a range of blueprints online for various game, film and television characters. I decided to model a Dalek as the design didn't look too complex. (Famous last words...)




Although incomplete, the model looks pretty good so far. I will probably work on this Dalek at a later date as I enjoyed modelling it.

8 February 2015

Feelin' Handy

During the end-of-semester break I decided to practice modelling in Maya. I worked on multiple models over the two weeks, but the most progress was made to this basic hand.



The process was easier than anticipated - taking only a few hours to get the model to it's current stage. As I have a keen interest in photo realism, I'd like to learn how to create and apply bump and displacement maps to add a skin-like texture.

4 February 2015

Raygun: Mark II - Design and Modelling

In college I completed a module which required me to create the conceptual idea for an indie game. I designed an environment, weapon and character for said game, which were later modelled in Autodesk Maya.


My design for the object: a raygun.

As this was my first time working in Maya, I was quite proud of my final model. However, I recently found the original file and realised that my modelling skills were limited to translating random polygon shapes into position. I also had no knowledge of texturing, so the model was coloured with various blinn materials. 


Raygun: Mark I consisted of over 70,000 polygon faces.

As I now have a better understanding of both modelling and texturing, I have decided to recreate the model from scratch. The new poly count consists of 1,342 faces and was completely created from the extrusions of a polygon sphere.




I feel that the initial colour scheme is quite overwhelming and works better in 2D than 3D. An acquaintance told me that the model could be a good design for the game 'Team Fortress 2', so this may have an impact when deciding upon the model's new colour scheme. 

An example to show the red and blue colour schemes in Team Fortress 2.

23 January 2015

First 3D Showreel


This the 3D showreel, which consists of my 3D modelling and animation work throughout the first semester.

Playing with Tails

Tails has be reused for this animation. This time I created two different obstacles for him to interact with: a basic stool and a small fire pit. This allowed me to experiment with fire dynamics which appear to be pretty complex due to the large amount of modifications that can be made.



In the playblast the fire appears as a green gas, but when rendered using Mental Ray the final image is much more appealing.



15 January 2015

Remy's Retopology

Prior to retopology, the Remy model consisted of over 9 million polygon faces and it was crucial that the density of the mesh was lowered for later rendering and animating.

I found myself starting the process from scratch multiple times due to the edge flow looking inconsistent, which was particularly noticeable on the face. I overcame this by deleting half of the model and then mirroring the geometry in order to achieve symmetry.



The Remy model after retopology.
The new model is made up of 1,528 faces and can be easily manipulated in Maya without the software freezing up. 



I have since realised that leaving the mouth as an empty hole looks strange, so I created a tongue and teeth. To add further detail to the tongue I extruded the central edge inwards to create the natural crease.

The next goal is to unwrap the UVs for texturing in Adobe Photoshop. I would like to experiment with fur as opposed to a flat texture, but this may take too long to render in time to meet the set deadline.

1 January 2015

Evolution of Remy


The first and final design.




This assignment requires me to create a character that can be modelled and textured using Autodesk Maya and Mudbox. I used elements from the original drawing to create multiple sketches of how the character might look, and then decided upon a final design that would be suitable for the task at hand. I could then create drawings of him from the front and side to be used as templates for modelling in Maya.

Through the rough shaping stage I strictly worked to my image planes, however I decided to make the legs longer and his head smaller. The suit will be modelled onto the character, but the hat is currently a separate model that can be removed from his head. As the character is somwhat simplistic, I was able to complete this stage fairly quickly before importing it into Mudbox for the rough sculpt.
Stage 1: Rough shaping in Autodesk Maya

Stage 2: Rough sculpt in Autodesk Mudbox
Although I have previously used Maya for modelling in college, I have had little experience with Mudbox. The result of the rough sculpt is somewhat sloppy, however it was my first attempt at using a graphic tablet. The model will now be imported back to Maya for retopology.

30 December 2014

Weight with Bony

This is Bony. The goal is to animate him lifting and pushing objects in Autodesk Maya using constraints.


Although I managed to create the animations, I feel that I will need to revisit and practice working with constraints to gain a better understanding of how they work.

16 October 2014

Squash and Stretch

The twelve principles of animation are essential techniques for animating in both 2D and 3D. The first principle, squash and stretch, involves the exaggeration of a character's body to create the illusion of weight and volume as it moves. Squash generally shows force, impact or anticipation, whilst stretch indicates acceleration or velocity.

To demonstrate, I was set the task of animating a bouncing ball. This required each frame to be individually drawn using a light box and animation pegs to assure that the animation flowed.

Throughout this process it was important to consider not only the volume of my ball, but that each drawing followed an arced motion path. It was somewhat difficult to judge the distance between each drawing as the velocity increased and decreased, however I upon watching the final video I feel that this is not too much of an issue.

I also attempted this exercise in Autodesk Maya using a polygon sphere with a rig that allowed the ball to move, squash and stretch.

I found this method to be much easier and quicker as the rig controlled the volume of the ball when squashing and stretching. The software also created the in-between frames, meaning that I avoided the earlier issue of judging distance. 



I also used Maya to complete a similar exercise where the ball needed to accelerate before coming to a sudden halt. This time the character has a tail, which follows through as the ball stops. This task was the easiest of the three, which is most probably due to the linear motion path. 

To further experiment with the principle of squash and stretch, I will later animate the same character to maneuver between various obstacles.

5 October 2014

The bloggin' begins...

My journey began in childhood, where I first discovered my love for video games. Not only do I enjoy playing games, but I consider them to be an art form - a gateway almost, allowing a person to visually explore another's imagination. I was fascinated by the designs that went into the creation of both characters and environments. 

Games I particularly enjoyed include 'Spyro the Dragon', 'Hotel Dusk' and 'Heavy Rain'. Heavy Rain was created by Quantic Dream - a French video game developing company who create realistic graphics using actors and techniques involving motion capture. The final results of the creating process are impeccable, as the character models are borderline identical to their real-life actor. 

In 2012 I began my studies of Animation for Film and Games at St. Austell College. I excelled in many areas of the course, working vigorously in software such as Autodesk Maya, Adobe Flash and Adobe Photoshop. The course taught me many important skills, such as how to create storyboards to a good standard, how to analyse existing video and photographic advertisements and how to visually present ideas. 

During my college course, I had much experience in working as a team - which was especially effective when designing TV idents. The assignment required me to work in a group of 2-3 people to create a 30-second ident for the fictional game-reviewing channel 'Game Hedz'. Within the project, my colleague was responsible for the environment design, whilst I created the character - which was modelled, rigged, textured and animated in Autodesk Maya.

A render from the final TV ident production.

I am currently studying Animation and Visual Effects at Falmouth University, where I am hoping to develop my skills further in order to achieve the career I hope for.